One Coat Fence Life
Unsurprisingly, you only need to use one coat of our One Coat Fence Life to colour and protect your fence or shed. Perfect if you want to get the job done quickly. You don't have to worry about it greying either, as its colour will last a couple of years. Job done. PRODUCT DETAILSColours and protects rough sawn woodKeeps its colour for up to 2 yearsRainproof in 1-2 hoursProtects your wood from greying This great product is available in a choice of colours. Medium Oak Dark Oak Red Cedar Forest Green Harvest Gold Tudor Black Oak RONSEAL ONE COAT FENCE LIFE Our Once Coat Fence Life colours and protects for up to 2 years. We've made it one coat, so you can get the job done quickly and easily. BEFORE YOU START Make sure it’s a warm, dry day (above 10°C and not going to rain). Cold, wet weather stops the stain from drying and it may even wash off. The wood also needs to be clean and dry, or the stain won’t soak in properly. Use a stiff brush to get rid of any dirt. USING ONE COAT FENCE LIFE Get lots of stain on your brush, put a good thick coat on and don’t spread it too far. This stain won’t cover strong or contrasting colours. If your wood is very weathered you may need to put another coat on. Leave for 4 hours between coats. CLEAN UP Take as much stain as possible off your brush and then clean it in warm, soapy water. Don’t empty any stain into drains or watercourses. Your local authority may have special ways to get rid of waste stains. To stop this from spilling in your car, keep it secure and stood upright. Usage Areas: All rough sawn wood, whether it's new or already stained with a similar colour. It's safe to use around plants and pets. Don't use this on decking, garden furniture or other smooth planed wood. Coverage: With one coat, 9L will cover up to 54m2 (approx 11 fence panels). Dry Time: It's dry and rainproof in 1-2 hours. Clean Up: Wash your brushes out in warm, soapy water.
Write Your Own Review