Timber Connectors
Timber Connectors
Finish = Galvanised
Sizes: 50mm & 65mm
Timber Connectors
Finish = Galvanised
Sizes: 50mm & 65mm
Used to connect 2 pieces of timber together.
When using to connect 2no rails together with universal posts follow the following steps:
1) Place the timber connector so it covers 50% of both rails and nail into position via the pre drilled holes using 50mm galvanised nails.
2) Using a claw hammer flatten the connector so the teeth bite into the rails.
3) Now using a 10mm wooden drill bit, drill through the hole in the centre of the connector so it passes all the way through the back of the rail.
4) Place a M10 cup square hex bolt through the hole in the connector and universal post and bolt it together.
Featured Items | No |
---|
Write Your Own Review